Victron Inverter 12/1600 230V Smart – Pure Sine Wave Inverter with Bluetooth for 12V Battery Systems
1300W Continuous Power | 3000W Peak Power | Pure Sine Wave | Bluetooth & VictronConnect | ECO Mode | VE.Direct
The Victron Inverter 12/1600 230V Smart converts the DC voltage from your 12V battery into 230V pure sine wave AC voltage. With 1300W continuous power and 3000W peak power, it supplies numerous electrical appliances without requiring a connection to the public electricity grid. Its short-term peak power is particularly useful when starting suitable appliances with higher inrush currents.
The available power is sufficient for a wide range of suitable 230V appliances. Proven toroidal transformer technology ensures reliable voltage conversion. The inverter delivers stable output voltage and frequency as well as a high-quality pure sine wave output. Thanks to its short-term power reserves, it is also suitable for numerous appliances with higher starting currents, provided their power requirements remain within the inverter's operating limits.
Thanks to integrated Bluetooth, you can conveniently monitor, configure and switch the inverter on and off using the free VictronConnect app. The VE.Direct interface also allows integration into a Victron monitoring system, enabling centralised monitoring and extending the system to support remote control via the internet.
Features:
- 12V battery systems
- 230V pure sine wave output
- 1600VA continuous power
- 1300W continuous power
- 3000W peak power
- Integrated Bluetooth
- VictronConnect app
- VE.Direct interface
- Adjustable ECO mode
- Programmable relay
- Remote on/off control
- Protection functions and LED diagnostics
- Steel housing, IP21 protection rating
Pure Sine Wave Output and Short-Term Power Reserves for 230V Appliances
Thanks to its pure sine wave output with stable voltage and frequency, you can reliably operate a wide range of 230V electrical appliances. Sensitive electronic equipment in particular, such as computers, televisions, audio equipment, chargers and electronic control systems, benefits from a consistent, high-quality power supply.
When starting appliances with higher inrush currents, the temporarily available 3000W peak power supports operation, for example with a compressor refrigerator, a suitable water pump or a power tool.
Using the VictronConnect app, you can adjust the output voltage between 210V and 245V and set the frequency to 50Hz or 60Hz, allowing you to adapt the output to the requirements of your electrical appliances.
Important: The available power depends on the ambient temperature and operating conditions and may decrease at higher temperatures. Ensure that the power consumption and any increased starting currents of your appliances remain within the inverter's power limits.
Where Can the Victron Inverter 12/1600 230V Smart Be Used?
The inverter is suitable for various applications where a 12V battery serves as the energy source and electrical appliances need to be operated at 230V. The following examples illustrate typical applications and suitable electrical appliances.
Motorhomes and Campervans
Power supply for 230V electrical appliances, such as smaller coffee machines, televisions, laptop power supplies, chargers or suitable kitchen appliances. This provides greater comfort when travelling and allows you to use numerous electrical appliances independently of a shore power connection, whether at a campsite or during off-grid camping.
Boats and Yachts
Power supply for 230V electrical appliances on board, such as chargers, smaller polishing machines, suitable power tools or compact dehumidifiers. This allows you to operate electrical equipment for maintenance work and onboard use during longer voyages or while at anchor, independently of a shore power connection.
Expedition and Service Vehicles
Mobile 230V power supply for power tool battery chargers, suitable electric drills, work lighting or laptops. Particularly useful for service work or extended stays away from an external power supply.
Stationary Battery Systems
Conversion of stored energy from a suitable 12V battery system into 230V AC voltage, for example to supply LED lighting, routers, computers, televisions or suitable household appliances. One possible application is an off-grid power supply system in garden buildings or small holiday homes.
Note: The appliances mentioned are examples of possible applications. Whether a particular appliance can actually be operated depends on its power consumption, any increased starting current and the simultaneous load from other appliances. The performance of the connected battery and the design of the installation must also be taken into account.
Energy-Saving ECO Mode – Efficient Energy Use
With ECO mode, you can reduce the inverter's own power consumption by approximately 85% when no appliances are being operated. This reduces the amount of energy drawn from your battery, helping to preserve stored energy reserves and leave more battery capacity available for your electrical appliances.
When ECO mode is enabled, the inverter automatically switches to an energy-saving search mode when the load falls below the configured shutdown threshold, interrupting the continuous 230V power supply. At regular intervals, it checks whether an appliance has been switched on and automatically resumes normal operation when a load is detected.
Using the VictronConnect app, you can individually adjust the wake-up and shutdown thresholds from 1W up to the inverter's rated power. This allows you to adapt load detection to the connected appliances.
Note: Appliances with power consumption below the configured wake-up threshold will not be supplied with power in ECO mode, as their power consumption is insufficient to wake the inverter from its energy-saving search mode.
LED Status Indicators, Bluetooth and the VictronConnect App
The integrated LED indicators on the Victron Inverter Smart provide information directly on the device about its current operating status as well as possible warnings and alarms, for example in the event of overload, overtemperature or low battery voltage.
For even greater convenience, the inverter features integrated Bluetooth and the free VictronConnect app. Connect the inverter wirelessly to your smartphone or tablet and monitor important operating data such as battery voltage, output voltage, connected load and relay status. Warnings and alarms can also be viewed conveniently in the app.
In addition, VictronConnect allows you to switch the inverter on and off and configure its settings individually. These include output voltage and frequency, battery voltage thresholds, ECO mode and the programmable relay. Firmware updates can also be carried out via the app.
Alternatively, you can connect the inverter to a computer using a VE.Direct-to-USB interface and monitor and configure it with VictronConnect.
VE.Direct – Integration into a Victron Monitoring System
Via the integrated VE.Direct interface, you can connect the inverter to an optionally available GX device, such as the Cerbo GX MK2 or Ekrano GX. The connection is established using a suitable VE.Direct cable, which is available in various versions. This allows you to monitor operating data centrally, view warnings and alarms, and switch the inverter on and off.
With an internet connection via Ethernet or Wi-Fi, the GX device also enables worldwide access through the Victron VRM Portal.
Alternatively, you can connect the optionally available GlobalLink 520 directly via VE.Direct. It transmits operating data to the VRM Portal using its integrated LTE-M mobile connection, enabling remote monitoring without an existing Wi-Fi or Ethernet network.
Further information on setting up and using remote monitoring can be found in the manual in the download section.
VRM Portal – Monitor Your Victron System from Anywhere in the World
With the Victron Remote Management Portal (VRM), you can centrally monitor and manage your Victron energy systems via the internet, whether you have a single installation or several locations. This requires a GX device with an internet connection to collect system data and transmit it to the VRM Portal. You can then use a web browser or the VRM app for iOS and Android to access current measurements, historical data, alarms and other system information, as well as use supported functions remotely.
- Purpose: Centralised remote monitoring and management of multiple Victron systems via the internet
- Requirements: Compatible GX device with an internet connection to collect system data and transmit it to the VRM Portal
- Access: VRM web portal or the corresponding VRM app, accessible via Victron Cloud accounts
- Functions:
- Remote monitoring of system status (voltages, currents, temperatures, state of charge) across multiple installations
- Historical data and trends (logs, graphs)
- Management of device groups, alarm and notification settings (email, push notifications)
- Remote updates and remote diagnostics (depending on the system configuration)
- Documentation of installation locations, logs and reports
- Platforms: Web browsers and mobile apps (iOS/Android) for VRM access
- Applications: Monitoring multiple installation locations, remote maintenance, alarm management and centralised status overview
- Internet requirements: An internet connection is required to access data and functions via the VRM Portal
Individual Control and Integrated Protection Functions of the Inverter 12/1600 230V Smart
In addition to convenient operation via VictronConnect, the Victron Inverter Smart offers additional options for individual control and integration into existing battery systems. External switches, suitable control contacts and the programmable relay allow various functions to be adapted to your requirements. At the same time, integrated protection functions monitor important operating conditions and can trigger a warning or shutdown in the event of overload, battery voltages outside the permitted range or other faults.
Remote On/Off Terminal and Programmable Relay
Independently of control via VictronConnect or the VRM Portal, the inverter features a separate remote on/off terminal. This allows you to switch the device on and off using an external switch, a suitable relay contact or a compatible battery management system (BMS). The inverter can therefore also be integrated into existing control systems for automatic operation.
The programmable relay also offers additional options, including:
- Forwarding warnings and alarm signals
- Signalling low battery voltage
- Controlling an external fan
- Integration into a suitable generator start/stop control system
Integrated Protection Functions
The Victron Inverter Smart features integrated protection functions that can trigger a warning or shutdown in the event of operating conditions outside the permitted limits.
These include:
- Short-circuit protection at the AC output
- Overload protection
- Battery undervoltage protection
- Battery overvoltage protection
- Overtemperature protection
- Detection of external AC voltage at the output
- Protection against excessive DC ripple voltage
Three 12V Victron Inverters Compared
Note: Further technical specifications for the devices included in this comparison can be found on the respective product detail pages, under the "Technical Data" tab or in the operating manual under the "Download" tab.
Scope of Delivery
- 1 x Victron Inverter 12/1600 230V Smart | PIN122161000
- 1 x Wall mounting bracket
- 5 x Mounting screws
Frequently Asked Questions About the Victron Inverter 12/1600 230V Smart (FAQ)
How much continuous power does the inverter provide?
The continuous output power is 1300W at 25°C and 1200W at 40°C. A peak power of 3000W is available for starting suitable appliances.
Which battery types are suitable for the inverter?
The inverter can be operated with suitable 12V lithium batteries as well as lead-acid batteries such as gel, AGM, OPzV and OPzS batteries.
To utilise the inverter's full power, the batteries must have sufficient capacity and be able to supply the required discharge current. With lithium batteries, the battery management system (BMS) must also be rated for this current. In addition, the battery cables must have a sufficient cross-sectional area.
What battery capacity does Victron recommend for the inverter?
Victron recommends a battery capacity of 300–800Ah for the Inverter 12/1600 230V Smart. For the battery connection, the manual specifies a cable cross-sectional area of 1×70mm² for a cable length of 0–5m and an external fuse rated at 250A.
Can I control the inverter using my smartphone?
Yes. Integrated Bluetooth enables a direct connection to the free VictronConnect app. This allows you to view operating information, configure settings and switch the inverter on or off. Warnings and alarms can also be displayed. However, the app does not send background notifications when it is not open in the foreground.
Can I also monitor the inverter remotely via the internet?
Yes, with additional hardware. The inverter can be connected via its VE.Direct interface to a Cerbo GX or Ekrano GX, for example. If the GX device is connected to the internet, the corresponding monitoring information is also available through the Victron Remote Management Portal (VRM). Alternatively, a GlobalLink 520 can be used. The required communication devices and connection cables are available separately.
What happens if the battery voltage becomes too low?
The inverter monitors the battery voltage and automatically shuts down when it falls below the configured threshold to prevent excessive battery discharge. You can individually configure the shutdown and restart voltage thresholds using the VictronConnect app.
Can the inverter charge my battery?
No. The Victron Inverter Smart is a standalone inverter without an integrated battery charging function. It converts the DC voltage from your battery into 230V AC voltage. A separate suitable battery charger or an appropriate charging system is required to recharge the battery.
Can I automatically switch between shore power and inverter operation?
The inverter does not have an integrated automatic transfer switch. However, an external transfer switch allows automatic switching between shore power and inverter operation.
Suitable solutions include the FraRon ATS16 automatic transfer switch or the Victron Filax 2.
Important: The ATS16 is suitable for 50Hz only. The Filax 2 supports both 50Hz and 60Hz in the appropriate version.
What is the difference between VictronConnect and the VRM Portal?
VictronConnect allows you to monitor, configure and control the inverter locally via Bluetooth or a suitable USB connection. The VRM Portal, on the other hand, enables remote monitoring via the internet, including historical data and alarm information. Additional communication hardware is required for this, such as a GX device with an internet connection.
