100Wp HV SOLA Frame solar module | 101-21100 | monocrystalline

100Wp HV SOLA Frame solar module - Monocrystalline - Compact & highly efficient thanks to HV technology

High-voltage module | Highly permeable, heat-resistant anti-reflective glass | Weather-resistant and durable | Integrated bypass diodes

The solar modules in the MONO series are high-quality modules with monocrystalline cells that always promise top results and a high energy yield. Increasing the number of cells and the associated increase in voltage ensures that the voltage is sufficient to support your energy supply even in seasons with little light. Thanks to their anti-reflective glass, the modules allow significantly more light to pass through and therefore ensure higher transmission compared to other modules. The solar modules can be installed and used in any self-sufficient battery applications such as motorhomes, garden sheds, camping and all off-grid systems. Thanks to the integrated bypass diodes in the junction box, the module can continue to produce electricity even when shaded or in low light conditions.

Special features:

• Cell efficiency up to 22.5%
• High voltage reduces losses on the cable route and enables higher yields with diffuse light
• MC4-compatible connectors - easy connection of several modules
• Integrated bypass diodes - continuous output even with partial shading or low light conditions
• Pre-wired with 90 cm solar cable - can be used directly
• Highly permeable, heat-resistant anti-reflective glass - increased light transmission and therefore improved energy yields
• IP68 protection class of the junction box
• Framed in a stable and salt water-resistant aluminium hollow chamber profile
• 10-year manufacturer's guarantee
• 10-year performance guarantee on 90% of the nominal output
• 25-year performance guarantee on 80% of the nominal output

100Wp HV SOLA Frame - HV stands for "high voltage" = high voltage

A total of 72 half cells and a voltage of 41.76V promise yields even in unfavourable light conditions, so that MPPT charge controllers can work optimally here with their Maximum Power Point technology. Conventional solar modules only deliver a low voltage in unfavourable diffuse light conditions, which is no longer sufficient to charge the battery. By increasing the number of cells and increasing the voltage, it is ensured that the voltage is sufficient to keep the solar charge controller working even in periods of low light. A further advantage: while the output remains the same, an increase in voltage results in a reduction in the current load on the cables. The high operating voltage reduces cable losses and smaller cable cross-sections can be used.

Robust, compact and lightweight design

The solar module is made from a stable and salt water-resistant aluminium hollow chamber profile frame and highly permeable, heat-resistant anti-reflective glass. The housing frame provides the module with stability to meet the requirements of mobile and outdoor use. It is complemented by the weatherproof junction box (IP68), which ensures maximum durability and longevity overall.

Scope of delivery

• 100Wp HV SOLA Frame solar module | 101-21100 | monocrystalline

Watt hour Manufacturer's guarantee

• 25 years at least 80 % of the nominal output
• 10 years at least 90 % of the rated output
• 10-year manufacturer's warranty

Further helpful tips can be found in our FAQ questions/answers page under the following link FAQ

SOLA Frame Mono 100 Wp HV

Electrical parameters*

*Values according to STC conditions (E= 1000W/m² ,Tc=25 °C, AM=1.5)

Temperature characteristics

Technical specifications

Guarantee and safety