125Wp SolarSwiss solar module super flat | monocrystalline | black

125Wp SolarSwiss solar module - Super flat, powerful & robust

Efficiency of 25.2% | Frameless | Super light | Glass surface | N-type solar cells | Made in Germany

With a height of just 4.2 mm (without connection box), the 125 Wp high-performance solar module is extremely flat and yet robust. The 36 monocrystalline solar cells are protected by a high-quality glass surface that prevents damage from external influences. The low-reflection surface ensures that the solar radiation hits the cells directly without any losses. The result: an impressive efficiency of 25.2%. This super-flat solar module made in Germany impresses with its visually and qualitatively outstanding workmanship.

The height of only 4.2 mm (without connection box) is particularly advantageous - this solar module is super flat and therefore offers decisive advantages for mobile applications. Thanks to the special, extremely flat and waterproof connection box on the top, the total module height is just 23.5mm. The minimal installation height hardly increases the height of your vehicle - important for clearance heights in subways or multi-storey car parks. At the same time, the flat design improves aerodynamics, reduces wind noise while driving and lowers fuel consumption. At just 6kg, the 125Wp solar module is impressively light - a decisive advantage in the motorhome sector, where every kilogram counts towards the permissible total mass. The low weight also pays off on boats, where weight distribution and stability are important, and on food trucks with a limited payload, making the module ideal for off-grid applications or wherever compact dimensions are required - from expedition vehicles to self-sufficient installations.

Features:

• super flat - 4.2mm | 23.5mm with junction box
• super light - frameless - only 6kg
• super robust and weather-resistant - glass surface
• super efficient - efficiency 25.2% due to N-type solar cells
• Suitable for off-road use

What are the advantages of the new N-type solar cells?

The N-type solar cells installed in this module - also monocrystalline - outperform conventional P-type cells in several areas. They achieve efficiencies of 25.2 per cent and more, as they can use more wavelengths of light to generate electricity. This results in higher yields, especially in poor light conditions. In addition, N-type cells age more slowly and retain their performance for longer - this means that even after several years, this solar module still works almost exactly as it did on the first day. The better temperature coefficient ensures that the modules also work more efficiently in hot conditions, whereas conventional cells lose a significant amount of power at high temperatures.

Super flat solar modules - the best of framed and flexible solar modules combined!

Super-flat solar modules with a glass surface optimise solar installation on motorhomes, boats and expedition vehicles. They combine many of the advantages of flexible and framed modules without having to accept their disadvantages.

Accessibility - your roof remains usable
One important advantage is that you can walk on your roof with the super flat module. Especially on motorhome roofs, where satellite systems, air conditioning systems, skylights and roof bonnets are already installed, every square centimetre becomes valuable. The situation is similar on boats: decks must remain accessible for manoeuvring, dropping anchor or mooring, while at the same time solar modules, bimini tops, railing fittings and davits (lifting devices or crane arms) compete for the limited space available. Add to this framed solar panels with their 3-5 cm high aluminium frames and you literally can't put your foot down safely - the roof or deck becomes a tripping hazard. Maintenance work on satellite systems, skylights or nautical equipment becomes a dangerous balancing act.

Thanks to the accessibility of the super-flat solar module (glass surface) and a total height of just 4.2 mm (without junction box), the roof and deck remain easily accessible. You can easily reach the satellite system, clean skylights, remove snow or handle lines and set anchors on the boat without having to climb over high module frames. This is not only more convenient, but also much safer - an invaluable advantage, especially on a swaying deck in rough seas.

No dirt traps - permanently clean installation
An often underestimated problem with framed modules is that dirt, leaves, dust and moisture accumulate under the aluminium frame over the years. On boats, there is also salty spray that settles under the frames. These areas are practically very difficult to clean, which not only looks unsightly, but can also lead to corrosion on the roof surface or boat deck in the long term. Moisture and salt water that creep under the frame cannot evaporate and attack the paint, gelcoat (resin top layer) and material.

Super-flat modules lie flat and leave no cavities for dirt deposits. The entire surface remains accessible, clean and easy to clean. Your motorhome, boat or vehicle roof remains in perfect condition for a long time - even in salty sea air.

Suitable for expeditions - robust against bushes and branches
Super-flat modules show their true strength in the expedition sector, and not only here. When travelling through dense bushes, on forest paths or under low-hanging branches, you will have no worries: Branches cannot get caught under the module, as often happens with framed modules due to the frame. The hardened solar glass on the front is not damaged if branches brush against it - scratches, which would occur with flexible modules with a plastic surface, are ruled out.

The robust glass surface also resists hail, falling nuts, cones or stones that are thrown up during off-road driving. On boats, it protects against flying ropes, shackles or other equipment in rough seas. Flexible modules with their sensitive plastic film would quickly suffer damage here and lose performance.

Aerodynamics and appearance - inconspicuous and streamlined
Super-flat modules blend seamlessly into the roofline and minimise air resistance. This reduces wind noise while driving and lowers fuel consumption compared to framed modules. On boats, the flat design minimises the area exposed to the wind and the weight high up, which improves stability and handling. Visually, they are discreet and modern - no bulky appearance that makes your vehicle or boat look taller or technically overloaded.

Weight - more payload for your journey
At just 6kg, the super-flat 125Wp module is significantly lighter than conventional framed modules with heavy aluminium frames. This saves valuable payload, which you can use for equipment, water or provisions - a decisive advantage, especially for motorhomes with limited weight reserves. On boats, every kilogram saved has a positive effect on weight distribution and stability, especially if the modules are mounted on top of a hardtop.

Super flat solar modules - the choice for demanding applications
The super flat solar module combines the advantages of flexible modules such as low weight and flat design with the robustness of framed modules thanks to tempered glass, a long service life and high efficiency. It can be walked on, is robust and provides reliable energy for decades - even under harsh maritime conditions with salt water, UV radiation and mechanical loads. Anyone who values an easy-care, durable and usable solar roof or deck will find the ideal solution here. They make it easier to keep the roof or deck clean, are safe and fully accessible - the perfect energy source for expeditions, long-term travel, maritime adventures and self-sufficient living.

We will be happy to advise you individually and work with you to find the optimum solution for your specific requirements and budget.

What do I need to consider when installing super flat solar modules?

Super flat solar modules must be mounted on a firm, straight and rigid surface so that mechanical stresses on the mounting surface are not transferred to the module. They are fixed to the surface using a high-quality adhesive, such as Dekalin MS-5. Holding spoilers, brackets or other fixing materials are not required.
Note: These solar modules are not bendable!

For an uncomplicated, reliable and complete solar installation, you can obtain other suitable components from our shop, such as Solar charge controllers, roof ducts, solar cables, batteries and inverters.

Scope of delivery

• 125Wp SolarSwiss solar module super flat | monocrystalline | black

Guarantees

• 24 months product guarantee
• 20 years on 80% of the output

Further helpful tips can be found in our FAQ questions/answers page under the following link FAQ.

125Wp SolarSwiss solar module super flat

All values apply under test conditions: Irradiation of 1000W/m², cell temperature25°C, AM 1.5.