Sicher Einkaufen - SSL-Verschlüsselung
You have
0 article (0,00 EUR)
in your basket.
Inverter / Charger Multi, pure sine, 500VA / 12V
Inverter / Charger Multi, pure sine, 500VA / 12V
Inverter / Charger Multi, pure sine, 500VA / 12V

Inverter / Charger Multi, pure sine, 500VA / 12V

show customer reviews Article No.: Multi500 Shipping weight: kg per piece, Shipping as parcel Availability: stock Lieferfrist: 1 to max. 5 working days *
486,00 EUR incl. statutory VAT 19%
plus Shipping costs

Inverter / Charger Multi, pure sine, 500VA / 12V

with internal IUoU Battery Charger and AC Transfer Switch

for Motor home, RC, Camper car, Boat and industrial use

Multi-functional
The Multi gets its name from the multiple functions it can perform. It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single enclosure. Beside these primary functions, however, the Multi has several advanced features that provide a range of new applications as outlined below.

Uninterrupted AC power
In the event of a grid failure, or shore or generator power being disconnected, the inverter within the Multi is automatically activated and takes over supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.

PowerControl – Dealing with limited generator or shore side power
With a Multi Control Panel a maximum generator or shore current can be set. The Multi will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.

Digital Multi Controll (optional)
The Digital Multi Control panel (DMC) is a remote panel designed to work with all Multis.

MultiControl

Programmable relay
The Multi is equipped with a programmable relay that by default is set as an alarm relay. The relay can be programmed for all kinds of other applications however, for example as a starter relay for a generator.

Adaptive 4-stage charging characteristics: bulk – absorption – float – storage
The microprocessor-driven adaptive battery management system can be adjusted for various types of batteries. The adaptive function automatically adapts the charging process to battery use.

The right amount of charge: variable absorption time
In the event of slight battery discharge, absorption is kept short to prevent overcharging and excessive gas formation. After deep discharging, the absorption time is automatically extended in order to fully charge the battery.

Preventing damage due to excessive gassing: the BatterySafe mode
If, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, damage due to excessive gassing will be prevented by automatically limiting the rate of voltage increase once the gassing voltage has been reached.

Less maintenance and aging when the battery is not in use: the Storage mode
The Storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the Storage mode float voltage is reduced to 2,2V/cell (13,2V for 12V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back
to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.

Two DC outputs for charging two batteries
The main DC terminal can supply the full output current. The second output, intended for charging a starter battery, is limited to 1A and has a slightly lower output voltage.

Increasing service life of the battery: temperature compensation
The temperature sensor (supplied with the product) serves to reduce charging voltage when battery temperature rises. This is particularly important for maintenance-free batteries, which could otherwise dry out by overcharging.

Configuration by computer or DIP switches
All settings can be changed by means of a computer. Some settings can be changed with DIP switches. For changing settings with the computer, the following is required:
- VEConfigureII software: can be downloaded free of charge at www.victronenergy.com.
- a RJ45 UTP cable and the MK2-USB interface cable is needed.

Further help you can find here: FAQ

Technical Details:

Inverter

  • Input voltage range (V DC): 9,5 - 17,0V
  • Output voltage: 230 VAC ± 2%
  • Frequency: 50Hz ± 0,1% (1)
  • Cont. output power at 25°C (VA): 500 (3)
  • Cont. output power at 25°C (W): 430
  • Cont. output power at 40°C (W): 400
  • Cont. output power at 65°C (W): 300
  • Peak power (W): 900
  • Maximum efficiency (%): 90
  • Zero-load power (W): 6,6
  • Zero load power in search mode (W): 2,2

Charger

  • Input voltage: 187-265 VA, 45-65Hz, Power Factor: 1
  • Charge voltage 'absorption' (V DC): 14,4
  • Charge voltage 'float' (V DC): 13,8
  • Storage mode (V DC): 13,2
  • Charge current house battery (A): 20 (4)
  • Charge current starter battery (A): 1
  • Battery temperature sensor: yes

General

  • Power Control function: yes
  • AC transfer switch (A): 16
  • VE.Bus communication port: yes
  • Programmable relay: yes (5)
  • Protection: a-g (2)
  • Operating temp. range: -40 bis +65°C
  • Cooling: fan assisted cooling
  • Humidity (non-condensing): max 95%

Enclosure

  • Material & Colour: Steel/ABS (blue RAL 5012)
  • Protection category: IP21
  • Battery-connection: 16mm²
  • 230 V AC-connection: G-ST18i connector
  • Weight (kg): 4,4
  • Dimensions (h x w x d): 311 x 182 x 100mm

Standards

  • Safety: EN 60335-1, EN 60335-2-29, EN 62109-1
  • Emission / Immunity: EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3
  • Road vehicles: EN 50498

(1) Can be adjusted to 60Hz and to 240V
(2) Protection
a. Output short circuit
b. Overload
c. Battery voltage too high
d. Battery voltage too low
e. Temperature too high
f. 230VAC on inverter output
g. Input voltage ripple too high
(3) Non-linear load, crest factor 3:1
(4) At 25°C ambient
(5) Programmable relay which can be set for: General alarm DC under voltage or generator start/stop signal function, AC rating: 230V/4A, DC rating: 4A up to 35VDC, 1A up to 60VDC

Attention: If you should not have the Adobe AcrobatReader installed on your system, you may download it for free from Adobe Inc. using the link

You have questions regarding the order process or the item?

Just contact an employee of our customer service team.

You can reach us by phone from Monday to Friday between 8:00 and 18:00 clock.
Tel: +49 6024 6341 560 or by fax +49 6024 6341 569
Of course we are also available via e-mail: kontakt@fraron.de


You would like to see the product before you purchase it, or you need personal conversation?

In case you like you can see all items in our show room in Mömbris.
We are also available from Monday to Friday between 8:30-12:30 and 13:30.18:30


What payment methods are available?

  • Cash / EC card payment for pick-up in the office branch in Schöllkrippen
  • Transfer / Payment by bank transfer
  • COD ( cash on delivery is only available for parcel shipments within Germany ) You pay the shipment at the deliverer.
  • PayPal including Buyer Protection (for EU countries plus Liechtenstein, Norway, Iceland)
  • Credit Card (Visa / Mastercard)


How long is the delivery-time / transportation-time

The stock status is indicated on the product page. In stock items will be shipped according to the method of payment or immediately after payment.
Transportations within Germany handed by DHL, abroad by DHL or DPD.
The transportation-time in Germany will be 1-2 business days. DHL deliver also on Saturday in Germany.
Forwarding goods like batteries we ship via the forwarder Emons, the terms range from 2-3 business days within Germany and abroad can not be stated flat rate, please contact us.

Customer reviews

...

Recommended items

Precision Battery Monitor BMV-700 including 500A Shunt for 12 / 24 / 36 / 48V
Versandgewicht: kg pro piece, Shipping as parcel Availability: stock Lieferfrist: 1 to max. 5 working days *
SGX Battery cable 14mm², AWG6, red
Shipping weight: 200 g per meter, Shipping as parcel Availability: stock Lieferfrist: 1 to max. 5 working days *
80A circuit breaker with reset / surface mount
Shipping weight: 240 g per piece, Shipping as parcel Availability: stock Lieferfrist: 1 to max. 5 working days *
Victron Digital Multicontrol 200/200A Remote Control for MultiPlus and Quattros
Versandgewicht: kg pro piece, Shipping as parcel Availability: stock Lieferfrist: 1 to max. 5 working days *
Victron Digital Multicontrol 200/200A GX Remote Control for MultiPlus and Quattros
Versandgewicht: kg pro piece, Shipping as parcel Availability: stock Lieferfrist: 1 to max. 5 working days *